HB 989: RELATING TO PLANS.

A BILL FOR AN ACT

RELATING TO PLANS.

BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF HAWAII:

     SECTION 1.  Section 502-17, Hawaii Revised Statutes, is amended by amending subsections (d) and (e) to read as follows:

     "(d)  On receipt for recordation of a transfer or separate description document concerning a lot in a subdivision, the registrar shall accept and file the document with:

     (1)  A metes and bounds description, either solely or as part of the document; and

     (2)  A county certified plat map, unless the land is being deregistered pursuant to part II of chapter 501[; and

     (3)  A letter from a licensed professional surveyor, certifying that the metes and bounds description conforms to the accompanying plat map].

     The document shall otherwise comply with the requirements for recordation under this section.  Any parcel created or subdivided before the effective date of the subdivision laws of the respective counties is exempt from the provisions of this subsection.

     (e)  For checking the survey and plan as to form and mathematical correctness, the department shall charge [$2 an hour] a fee pursuant to rules adopted by the department of accounting and general services, and shall require the owner of the land to deposit the [estimated] cost thereof before [making such check.] approving the survey and plan."

     SECTION 2.  Section 502-18, Hawaii Revised Statutes, is amended to read as follows:

     "§502-18  Description; lot subdivisions.  A metes and bounds description of the exterior boundaries of the parcel or parcels of land sought to be registered as a file plan shall be written upon the plan, or printed or typewritten on unruled good quality white paper 11 inches long by 8 1/2 inches wide and shall be filed [in duplicate] with the file plan.  The metes and bounds description shall be dated and signed by the licensed professional surveyor making the field survey, or under whose supervision the field survey was executed.  If the land sought to be registered as a file plan is being deregistered pursuant to part II of chapter 501, the metes and bounds description shall be dated and signed by the licensed professional surveyor making the file plan, or under whose supervision the file plan was made.  The boundaries of the land platted shall be described as running from left to right (clockwise) and the azimuth system shall be used in designating the courses of the survey with zero or 360 degrees at due South; 90 degrees at due West; 180 degrees at due North; 270 degrees at due East.  Any printed or typewritten description filed separately with the file plan shall be recorded in the registry system and the book and page or document number thereof noted on the file plan.  Expense of recordation shall be charged to the owner.  The initial point in the description shall clearly show the connection with the government triangulation system.  All outside corners of the tract shall be substantially marked by monuments in the ground, where practicable; unless the land is being deregistered pursuant to part II of chapter 501.  In all cases where tracts of land are subdivided into lots, with the intention of conveying separate lots by lot number and reference to the plat, it is necessary to show the true azimuths and lengths of all principal lines and the lot areas.  A sufficient number of durable monuments shall be placed in the ground so as to accurately identify each lot, unless the land is being deregistered pursuant to part II of chapter 501.  Any lands being deregistered pursuant to part II of chapter 501 shall not subdivide or consolidate when registering as a file plan[, and only contiguous parcels shall be shown on the same plan].  Only contiguous parcels shall be shown on the same plan unless the department of accounting and general services determines that an exception would be appropriate."

     SECTION 3.  Section 502-19, Hawaii Revised Statutes, is amended to read as follows:

     "§502-19  Plans on [tracing cloth;] tangible medium; size; scale.  All plans [must] shall be on [tracing cloth of good quality,] a tangible medium of good quality, approved by the department of accounting and general services, and shall be of one of the following sizes, the figures indicating inches:  10 x 15; 15 x 21; 21 x 32; 30 x 36; 36 x 42; or [42, 48, or 54] 36 wide without restriction as to length; which plans shall be prepared and drawn according to [some] one of the following scales: 10, 20, 30, 40, 50, 60, 100, 200, 300, 400, 500, 600, 1000, 2000, 3000, 4000, [or] 5000, or 6000 feet to an inch."

     SECTION 4.  Section 502-20, Hawaii Revised Statutes, is amended to read as follows:

     "§502-20  New maps for old.  The registrar shall forward any such map or plan to the department of accounting and general services, at such times when the original tracings of filed plans and land court maps on file in the bureau of conveyances[,] are found to be in such condition that satisfactory blueprint copies thereof cannot be made, [shall forward any such map or plan to the department of accounting and general services of the State,] with the request that another [tracing] copy of good quality thereof be made.  The department, on receipt of the request and map or plan, shall prepare another [tracing] copy thereof, on a tangible medium of good quality, and shall certify that same is a true copy of the original on file in the bureau of conveyances, and shall file the same[, together with two certified blueprint copies,] with the registrar.  Any such certified [tracing] copy of a map or plan shall thereafter be regarded for all purposes as the original."

     SECTION 5.  Statutory material to be repealed is bracketed and stricken.  New statutory material is underscored.

     SECTION 6.  This Act shall take effect on July 1, 3000.

Report Title:

DAGS; Plans; Land Survey; Subdivision; Maps

Description:

Removes outdated requirements for plans filed with the registrar's office.  Updates the permissible drawing scales used in plans.  Clarifies statutory fees are pursuant to rules adopted by the Department of Accounting and General Services.  Authorizes the Department of Accounting and General Services to approve the format of plans.  Effective 7/1/3000.  (HD1)

The summary description of legislation appearing on this page is for informational purposes only and is not legislation or evidence of legislative intent.

A BILL FOR AN ACT

RELATING TO PLANS.

BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF HAWAII:

     SECTION 1.  Section 502-17, Hawaii Revised Statutes, is amended by amending subsections (d) and (e) to read as follows:

     "(d)  On receipt for recordation of a transfer or separate description document concerning a lot in a subdivision, the registrar shall accept and file the document with:

     (1)  A metes and bounds description, either solely or as part of the document; and

     (2)  A county certified plat map, unless the land is being deregistered pursuant to part II of chapter 501[; and

     (3)  A letter from a licensed professional surveyor, certifying that the metes and bounds description conforms to the accompanying plat map].

     The document shall otherwise comply with the requirements for recordation under this section.  Any parcel created or subdivided before the effective date of the subdivision laws of the respective counties is exempt from the provisions of this subsection.

     (e)  For checking the survey and plan as to form and mathematical correctness, the department shall charge [$2 an hour] a fee pursuant to chapter 40 of title 3, Hawaii Administrative Rules, and shall require the owner of the land to deposit the [estimated] cost thereof before [making such check.] approving the survey and plan."

     SECTION 2.  Section 502-18, Hawaii Revised Statutes, is amended to read as follows:

     "§502-18  Description; lot subdivisions.  A metes and bounds description of the exterior boundaries of the parcel or parcels of land sought to be registered as a file plan shall be written upon the plan, or printed or typewritten on unruled good quality white paper 11 inches long by 8 1/2 inches wide and shall be filed [in duplicate] with the file plan.  The metes and bounds description shall be dated and signed by the licensed professional surveyor making the field survey, or under whose supervision the field survey was executed.  If the land sought to be registered as a file plan is being deregistered pursuant to part II of chapter 501, the metes and bounds description shall be dated and signed by the licensed professional surveyor making the file plan, or under whose supervision the file plan was made.  The boundaries of the land platted shall be described as running from left to right (clockwise) and the azimuth system shall be used in designating the courses of the survey with zero or 360 degrees at due South; 90 degrees at due West; 180 degrees at due North; 270 degrees at due East.  Any printed or typewritten description filed separately with the file plan shall be recorded in the registry system and the book and page or document number thereof noted on the file plan.  Expense of recordation shall be charged to the owner.  The initial point in the description shall clearly show the connection with the government triangulation system.  All outside corners of the tract shall be substantially marked by monuments in the ground, where practicable; unless the land is being deregistered pursuant to part II of chapter 501.  In all cases where tracts of land are subdivided into lots, with the intention of conveying separate lots by lot number and reference to the plat, it is necessary to show the true azimuths and lengths of all principal lines and the lot areas.  A sufficient number of durable monuments shall be placed in the ground so as to accurately identify each lot, unless the land is being deregistered pursuant to part II of chapter 501.  Any lands being deregistered pursuant to part II of chapter 501 shall not subdivide or consolidate when registering as a file plan[, and only contiguous parcels shall be shown on the same plan].  Only contiguous parcels shall be shown on the same plan unless the department of accounting and general services of the State determines that an exception would be appropriate."

     SECTION 3.  Section 502-19, Hawaii Revised Statutes, is amended to read as follows:

     "§502-19  Plans on [tracing cloth;] tangible medium; size; scale.  All plans [must] shall be on [tracing cloth of good quality,] a tangible medium of good quality, approved by the department of accounting and general services of the State, and shall be of one of the following sizes, the figures indicating inches:  10 x 15; 15 x 21; 21 x 32; 30 x 36; 36 x 42; or [42, 48, or 54] 36 wide without restriction as to length; which plans shall be prepared and drawn according to [some] one of the following scales: 10, 20, 30, 40, 50, 60, 100, 200, 300, 400, 500, 600, 1000, 2000, 3000, 4000, [or] 5000, or 6000 feet to an inch."

     SECTION 4.  Section 502-20, Hawaii Revised Statutes, is amended to read as follows:

     "§502-20  New maps for old.  The registrar, at [such] the times when the original tracings of filed plans and land court maps on file in the bureau of conveyances[,] are found to be in such condition that satisfactory [blueprint] copies thereof cannot be made, shall forward any such map or plan to the department of accounting and general services of the State, with the request that another [tracing] copy of good quality thereof be made.  The department, on receipt of the request and map or plan, shall prepare another [tracing] copy thereof, on a tangible medium of good quality, and shall certify that same is a true copy of the original on file in the bureau of conveyances, and shall file the same[, together with two certified blueprint copies,] with the registrar.  Any such certified [tracing] copy of a map or plan shall thereafter be regarded for all purposes as the original."

     SECTION 5.  Statutory material to be repealed is bracketed and stricken.  New statutory material is underscored.

     SECTION 6.  This Act shall take effect upon its approval.

Report Title:

DAGS; Plans; Land Survey; Subdivision; Maps

Description:

Removes outdated requirements for plans filed with the registrar's office; updates the statutory fee schedule to reflect those adopted in chapter 40 of title 3, HAR; grants additional discretion to the Department of Accounting and General Services to approve the format of plans; and updates permissible drawing scales used in plans.

The summary description of legislation appearing on this page is for informational purposes only and is not legislation or evidence of legislative intent.

STAND. COM. REP. NO.  912

Honolulu, Hawaii

                , 2025

RE:   H.B. No. 989

      H.D. 1

Honorable Nadine K. Nakamura

Speaker, House of Representatives

Thirty-Third State Legislature

Regular Session of 2025

State of Hawaii

Madame:

     Your Committee on Finance, to which was referred H.B. No. 989, H.D. 1, entitled:

"A BILL FOR AN ACT RELATING TO PLANS,"

begs leave to report as follows:

     The purpose of this measure is to:

     (1)  Update the requirements for plans filed with the Registrar's Office;

     (2)  Require the filing fees to be set pursuant to rules adopted by the Department of Accounting and General Services; and

     (3)  Authorize the Department of Accounting and General Services to approve the format of plans and drawing scales.

     Your Committee received testimony in support of this measure from the Department of Accounting and General Services.

     As affirmed by the record of votes of the members of your Committee on Finance that is attached to this report, your Committee is in accord with the intent and purpose of H.B. No. 989, H.D. 1, and recommends that it pass Third Reading.

Respectfully submitted on behalf of the members of the Committee on Finance,

STAND. COM. REP. NO.  533

Honolulu, Hawaii

                , 2025

RE:   H.B. No. 989

      H.D. 1

Honorable Nadine K. Nakamura

Speaker, House of Representatives

Thirty-Third State Legislature

Regular Session of 2025

State of Hawaii

Madame:

     Your Committee on Labor, to which was referred H.B. No. 989 entitled:

"A BILL FOR AN ACT RELATING TO PLANS,"

begs leave to report as follows:

     The purpose of this measure is to:

     (1)  Update the requirements for plans filed with the Registrar's Office;

     (2)  Require the filing fees to conform with fee schedules adopted in Hawaii Administrative Rules; and

     (3)  Authorize the Department of Accounting and General Services to approve the format of plans and drawing scales.

     Your Committee received testimony in support of this measure from the Department of Accounting and General Services and one individual.

     Your Committee finds that the State's filing and approval process for plans to develop land can be inefficient, costly, and wasteful.  Your Committee also finds that when a plan is deemed to be unsatisfactory from which copies cannot be made, submission of certified copies and certification letters are required which further delay the filing of plans and creates unnecessary paper waste.  Your Committee believes that this measure increases the efficiency of filing plans by updating the required materials on which plans can be drawn on and streamlining the approval process to the Department of Accounting and General Services.

     Your Committee has amended this measure by:

     (1)  Clarifying that filing fees are pursuant to rules adopted by the Department of Accounting and General Services;

     (2)  Changing the effective date to July 1, 3000, to encourage further discussion; and

     (3)  Making technical, nonsubstantive amendments for clarity, consistency, and style.

     As affirmed by the record of votes of the members of your Committee on Labor that is attached to this report, your Committee is in accord with the intent and purpose of H.B. No. 989, as amended herein, and recommends that it pass Second Reading in the form attached hereto as H.B. No. 989, H.D. 1, and be referred to your Committee on Finance.

Respectfully submitted on behalf of the members of the Committee on Labor,